Status Light Board (Slb); Formatter Interface Conversion Board (Ficb) For Cp2420-Xe - Christie CP2420-Xe Service Manual

Status light board (SLB)

The status light board (SLB) provides visual information about the operational state of the projector.
1. Remove the front top cover (on page 50).
2. Remove the high security cover (on page 51).
3. Disconnect the SLB_P1 harness.
4. Remove two screws securing the SLB and remove it.
5. Replace the SLB.
6. To re-install, follow these steps in reverse order.
Formatter interface conversion board (FICB) for
CP2420-Xe
Learn how to replace the formatter interface conversion board (FICB).
Only applies to: CP2420-Xe
1. For the 2K FICB, disconnect the harnesses before removing the card cage.
2. Remove the card cage (on page 88).
3. Disconnect the three mini-SAS cables.
4. Remove six screws securing the FICB.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Printed circuit boards and sensors
108