Christie CP2420-Xe Service Manual page 71

4. Disconnect the inline harness connector (PUMP FAN 26).
5. Remove the two screws from the top frame securing the liquid cooling module.
6. Loosen one screw securing the liquid cooling module.
7. Remove the cooling pump assembly.
8. Loosen the nut at the top of the reservoir.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
71