Christie CP2420-Xe Service Manual page 97

5. Disconnect the three LVDS cables from the FICB.
6. Open the service access door by reaching inside and actuating the mechanical plunger located
in the center of the light engine fan pack.
7. Loosen the three screws securing the light engine.
8. Remove the light engine from the projector.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Optics
97