Christie CP2420-Xe Service Manual page 19

5. Continue retracting the lens.
a) If the bottom edge of the image comes into focus before the lens is completely retracted,
adjust the vertical boresight screw to direct or aim the lens mount up towards the top of
the screen to balance out the top and bottom edges.
b) If the top edge of the image is not in focus, adjust the vertical boresight screw to direct or
aim the lens mount toward the bottom of the screen.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Service setups
19