Tools Required For Service; Index Of Parts And Modules - Christie CP2420-Xe Service Manual

Tools required for service

Learn which tools are required for servicing the projector.
• Keys for security locks
• Long magnetic-tip Phillips
• Hex keys: 3/32 inches, 9/64 inches, 7/64 inches, 5/32 inches, 3/16 inches, 2.5 mm, 3 mm
• Nut drivers: 9/16 inches, 7/32 inches, 7 mm
• Electrostatic protective strap and pad
• Disposable Nitrile gloves (included with optical components)
• When handling the lamp, required protective clothing/safety gear includes:
• Face shield
• Vinyl-coated or interlock knit-lined gloves
• Nylon flak jacket

Index of parts and modules

The following table lists the parts and modules for CP2420-Xe and CP4420-Xe.
Description
Ventilation and cooling
12V 0.6A 4-wire 92 mm card cage exhaust fan
Green/red light engine FPGA fan—CP4420-Xe only
Main AC blower (230V)
Radiator fan
Heat exchanger (120 mm)
Pump assembly (12VDC)
Vane switch—exhaust
Lamp compartment
Lamp door interlock
Lamp reflector
Lens mount components
Lens mount manual
10 mm slide assembly
Focus motor
Zoom motor kit
Motor upgrade kit
Zoom upgrade kit
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
screwdrivers - #1, #2 and #3
Parts and module replacement
Part Number
003-110827-XX
003-112555-XX
003-001563-XX
003-121677-XX
003-201262-XX
003-201261-XX
003-004021-XX
003-001526-XX
003-001189-XX
003-102333-XX
003-101198-XX
003-101194-XX
003-001515-XX
127-102104-XX
003-006556-XX
46