2. Remove the front top cover (on page 50).
3. Loosen the two screws securing the rear top cover to the chassis.
4. Open the lamp door (on page 53).
5. Remove the LVPS/LPS cover (on page 53).
6. Lift up the rear top cover and remove.
7. To re-install, follow these steps in reverse order.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
56