Christie CP2420-Xe Service Manual page 69

7. Remove the four screws securing the bottom cover/fan assemblies to the base.
8. Pull off the fans from the bottom cover's rubber isolators.
9. To re-install, follow these steps in reverse order.
Use needle-nose pliers to pull the rubber isolators through the fan mounting holes.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
69