Left Access Cover - Christie CP2420-Xe Service Manual

2. Tilt and lift the rear cover just enough for the bottom tabs to clear the frame and remove.
3. To re-install, follow these steps in reverse order.

Left access cover

Remove the left access cover to access the components in the illumination optics system (IOS) and
liquid-cooling compartments.
1. Loosen the three screws at the top of the cover.
2. Pull up the cover to clear the bottom tabs and remove.
3. To re-install, follow these steps in reverse order.
When re-installing the cover, align and insert the bottom tabs first, then secure the cover with
the screws.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
52