Christie CP2420-Xe Service Manual page 66

The new lens mount includes three post screws that set the required distance of the lens mount
from the projector head. To avoid damaging the lens mount, do not adjust the post screws.
9. Adjust the boresight (left and right (on page 16), top and bottom (on page 18)) after replacing
lens mount.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Lens mount components
66