4. Continue retracting the lens.
a) If the right edge of the image comes into focus before the lens is completely retracted,
adjust the horizontal boresight screw to direct or aim the lens mount towards the left of
the screen to balance out the left and right edges.
b) If the left edge of the image is not in focus, adjust the horizontal boresight screw to direct
or aim the lens mount toward the right side of the screen.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Service setups
17