Christie CP2420-Xe Service Manual page 99

5. Disconnect the three mini-SAS cable from the card cage.
6. Unroute the mini-SAS cables from clip.
7. Loosen the two screws securing the knob enclosure bracket.
8. Open the service access door by reaching inside and actuating the mechanical plunger located
in the center of the light engine fan pack.
9. Loosen the three screws securing the light engine.
10. Remove the light engine from the projector.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Optics
99