Configuring Ip Network Support - Polycom VSX Series Administrator's Manual

Administrator's Guide for the VSX Series

Configuring IP Network Support

Specifying H.323 Settings
3 - 6
Use the following sections to configure the system so that users can place and
receive video calls using IP on your LAN or WAN:
❑
H.323 Settings, includes Gatekeeper and Gateway
❑
SIP Settings
❑
Quality of Service
❑
Firewall or NAT
❑
Streaming
If your network uses a gatekeeper, the system can automatically register its H.323
name and extension. This allows others to call the system by entering the H.323
name or extension instead of the IP address.
To specify H.323 settings:
1. Go to System > Admin Settings > Network > IP > H.323 Settings.
2. Configure these settings:
Setting Description
Enable IP H.323 Specifies whether to allow IP dialing.
Display H.323 Lets users placing a gateway call enter the H.323 extension
Extension separately from the gateway ID.
If you do not check this box, users make gateway calls by entering
the call information in this format:
gateway ID + ## + extension
H.323 Name Specifies the name that gatekeepers and gateways use to identify
this system. You can make point-to-point calls using H.323 names
if both systems are registered to a gatekeeper.
The H.323 Name is the same as the System Name, unless you
change it. Your organization's dial plan may define the names you
can use.
www.polycom.com/videodocumentation