Polycom VSX Series Administrator's Manual page 123

Configuring Multipoint Settings
© Polycom, Inc.
You can customize the way video is handled in multipoint calls to best support the
types of calls your organization is making.
To configure multipoint video:
1. Go to System > Admin Settings > Monitors > Multipoint Setup.
2. Configure these settings:
Setting
Auto-Answer
Multipoint
VSX 3000
VSX 7000
VSX 8000
Multipoint Mode
VSX 3000
VSX 7000
VSX 8000
Description
Specifies whether to accept incoming multipoint calls
automatically.
Auto — The view switches between Full Screen mode
and Discussion mode, depending on the interaction
between the sites.
If multiple sites are talking at the same time, Discussion
mode is used. If one site is talking uninterrupted for at least 15
seconds, the speaker appears full screen.
Discussion — All sites are displayed at the same time
in separate windows on the display. This mode is also
called continuous presence.
Presentation — The speaker sees all other sites in
discussion mode while the other sites see the speaker
in full screen mode.
Full Screen — The site that is speaking is shown in full
screen to all other sites. This mode is also called
voice-activated switching.
Chapter 4 - Customizing the VSX System
4 - 33