Polycom VSX Series Administrator's Manual page 124

Administrator's Guide for the VSX Series
Configuring with PathNavigator's Conference on Demand Feature
Things to Note when Using PathNavigator's Conference on Demand
4 - 34
If your organization uses Polycom's PathNavigator, you can use PathNavigator's
Conference on Demand feature to place multipoint calls with up to 10 sites,
including the site that places the call.
In order to place calls using PathNavigator, you need to:
❑
Register your VSX system with PathNavigator,
❑
Configure your VSX system to use PathNavigator for multipoint calls (see
Configuring the System to Use a Gatekeeper on page
❑
Create a multi-site entry in the Directory that can be used to place the
multipoint call.
❑
Once the call begins, users cannot add another site to the call — even if the site
was in the call originally and is attempting to rejoin. Because of this, you
cannot place cascaded multipoint calls through PathNavigator.
❑
The MGC needs to have enough ports available to complete the call. The
system displays a message if the MGC does not have enough ports available
to connect all the sites.
3-7), and
www.polycom.com/videodocumentation