Polycom VSX Series Administrator's Manual page 118

Administrator's Guide for the VSX Series
Using the System for Specialized Applications
Setting Passwords and Security Options
4 - 28
You can customize the system to show only a specific set of numbers to call. This
mode, also known as "kiosk mode," can be used for specialized applications, such
as customer query stations or systems used for calling the same numbers on a
regular basis. Kiosk mode requires little or no training and instructions can be
incorporated into the screen design.
See Designing the Home Screen on page 4-39
mode and its applications.
You can enter or change the administrator and meeting passwords as well as
specify whether to allow remote access to the system.
To set passwords and security options:
1. Go to System > Admin Settings > General Settings > Security.
2. Configure these settings:
Setting
Admin Password
Meeting Password
Allow Access to
User Settings
AES Encryption
Description
Enter or change the Admin Password.
When the Admin Password is set, you must enter this password
to:
• Make configuration changes not in the User Settings screen.
• Update the software.
• Manage the system using the VSX Web.
Specifies the password users must supply to join multipoint calls
on this system if the call uses the internal multipoint option, rather
than an external MCU.
This field can also be used to store a password required by
another system that this system calls. If a password is stored in
this field, you do not need to enter it at the time of the call; the VSX
system supplies it to the system that requires it.
Specifies whether the User Settings screen is accessible to users
via the System screen.
Uncheck this option if you do not want users to change
environmental settings.
Specifies whether to encrypt calls with other sites that support
AES encryption.
for more details about the kiosk
www.polycom.com/videodocumentation