Polycom VSX Series Administrator's Manual page 94

Administrator's Guide for the VSX Series
Setting Camera Presets
4 - 4
To configure a second camera (VSX 3000, VSX 7000, VSX 8000):
Go to this screen:
Cameras
System > Admin Settings >
Cameras
Camera Settings
System > Admin Settings >
Cameras > Next
Video Quality
System > Admin Settings >
Cameras > Next > Next
Serial Port
VSX 7000, VSX 8000
System > Admin Settings >
General Settings > Serial Port
Camera presets are stored camera positions that you can create ahead of time or
during a call.
Presets allow users to:
❑
Automatically point a camera at pre-defined locations in a room.
❑
Select a video source such as a VCR or DVD player, a document camera, or an
auxiliary camera.
If your system's main camera supports electronic pan, tilt, and zoom movement,
you can create up to 100 preset camera positions for the near site. Each preset stores
the camera number, its zoom level, and the direction it points (if appropriate).
Near-site presets are available for VSX room systems. They remain in effect until
you delete or change them.
Configure these settings:
• Designate this as the Primary Camera, if desired.
• Set Camera Direction to specify which way the
camera moves when you control it with the remote
control. (VSX 7000, VSX 8000)
1. Name the camera.
2. Select a camera icon.
3. If you used an RCA to mini-DIN adapter to connect
the camera cable, change the Video Format to
Composite. (VSX 8000)
Set the video quality (Motion for people video or
Sharpness for still images).
If it is a PTZ camera:
1. Set the RS-232 Mode to Sony PTZ camera control.
2. Specify which camera is associated with this port.
www.polycom.com/videodocumentation