Polycom VSX Series Administrator's Manual page 133

Adding a Screen Saver Logo
Adding a Screen Saver News Feed
© Polycom, Inc.
You can customize the VSX system to display your own logo instead of the
Polycom logo.
To upload a screen saver logo:
1. On a PC, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://255.255.255.255
Enter the user name and administrator's password, if a password has been
3.
established.
4. Click System Setup > Utilities > Screen Saver, click Next, and follow the
onscreen instructions for uploading a logo file.
You can customize the VSX system to display a news feed when the system is in
sleep mode.
To configure a screen saver news feed:
1. On a PC, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://255.255.255.255
3. Enter the user name and administrator's password, if a password has been
established.
4. Click System Setup > Utilities > Screen Saver, and click News Feed.
5. Select a stream content, click Submit, and close the stream content window.
6. Click Update.
Chapter 4 - Customizing the VSX System
, to go to VSX Web.
, to go to VSX Web.
4 - 43