Polycom VSX Series Administrator's Manual page 104

Administrator's Guide for the VSX Series
4 - 14
To configure VCR/DVD audio settings for playing a videotape or DVD:
Go to this screen:
VSX 3000
Audio Levels
VSX 6000, VSX 7000
System > Admin Settings >
Audio > Audio Settings >
Next > Next
Audio I/O
VSX 6000, VSX 7000
System > Admin Settings >
Audio > Audio Settings > Next
VCR/DVD
VSX 8000
System > Admin Settings >
Audio > Audio Settings > Next
> Next > Next
To configure VCR/DVD audio settings for recording a call:
Go to this screen:
Audio Levels
VSX 6000, VSX 7000
System > Admin Settings >
Audio > Audio Settings >
Next > Next
VSX 8000
All audio from the near-site and far-site is recorded, along with video from the
system's main monitor.
Configure these settings:
No additional configuration is required.
Ensure that Midrange Speaker is On.
Set Line Input (Red) and Line Input (White) to VCR.
Set VCR Audio In mode to VCR.
Configure these settings:
Set Line Outputs to VCR - Far and Near Audio.
No additional configuration is required.
www.polycom.com/videodocumentation