Polycom VSX Series Administrator's Manual page 62

Administrator's Guide for the VSX Series
2 - 38
Do not connect the power cord to a wall outlet until you have connected all standard and
optional equipment to the system.
To connect power and power on the system:
For this
system... Do this:
VSX 3000 1. Connect the power supply to the power connector on the back of the
system.
2. Connect the power cord to the power supply.
3. Plug the power supply into an electrical outlet.
4. Press the power switch near the connectors on the back of the
system.
5. Press the power switch on the lower back corner back of the monitor.
6. Press the power button on the front of the monitor.
VSX 6000 1. Connect the power supply to the power connector on the back of the
system.
2. Connect the power cord to the power supply.
3. Plug the power supply into an electrical outlet.
4. Press the power switch on the back of the system.
VSX 7000 1. Place the subwoofer directly below the main monitor, if possible.
If you install the VSX 7000 system in a cart or cabinet, ensure that the
subwoofer is not enclosed behind a solid door. Placing any solid
object in front of the subwoofer interferes with the sound.
2. Connect the subwoofer cable to the power connector on the back of
the system.
3. Connect the power cord to the subwoofer.
4. Plug the subwoofer into an electrical outlet.
5. Press the power switch on the back of the system.
VSX 8000 1. Connect the power cord to the power connector on the back of the
system.
2. Plug the power cord into an electrical outlet.
3. Press the power switch on the front of the system. The light turns
green.
www.polycom.com/videodocumentation