Polycom VSX Series Administrator's Manual page 197

Actions that Cause the System to Restart
© Polycom, Inc.
The VSX system restarts in the following situations:
❑
Changing Monitor 1 configuration from non-VGA to VGA, or from VGA to
non-VGA.
❑
Changing any of the following settings in the LAN Properties screens:
• Connect to My LAN
• Host Name
• IP Address — Changing how the system obtains an IP address or
changing the address that you have entered manually
• DNS Servers
• Default Gateway
• Subnet Mask
• WINS Server
• LAN Speed
• Duplex Mode
❑
Changing any setting under Enable Remote Access, on the Security screen:
• FTP
• Web
• Telnet
• SNMP
❑
Changing the Web Access Port on the Security screen
❑
Changing any setting on the SNMP screen:
• Enable SNMP
• Community
• Contact Name
• Location Name
• System Description
• Console IP Address
Appendix
Appendix - 3