Polycom VSX Series Administrator's Manual page 115

Setting the Admin Password
© Polycom, Inc.
Set an administrator's password to restrict who can:
❑
Make changes other than those in the User Settings screen
❑
Upgrade the VSX Series system software
❑
Perform remote management using the VSX Web
To set or change the Admin Password:
1. Go to System > Admin Settings > General Settings > Security.
2. Enter or change the password.
To reset a forgotten Admin Password:
1. Get the system's serial number from the system or from the System
Information screen.
2. Go to System >Diagnostics > Reset System.
3. Enter the system's serial number and select Delete System Settings.
4. Select Reset System.
When the system completes the reset, it leads you through the setup wizard. You
can enter a new Admin Password when you set up the system.
Chapter 4 - Customizing the VSX System
4 - 25