Polycom VSX Series Administrator's Manual page 101

Configuring Content Display with a Visual Concert VSX or ImageShare II
© Polycom, Inc.
You will then receive a People+Content IP software activation key.
4. Go to System > Admin Settings > General Settings > Options on the VSX
system.
5. Enter the People+Content IP software activation key.
To install People+Content IP on a computer:
1. On the computer, open a web browser and go to the Polycom Resource Center
Video Downloads page at http://extranet.polycom.com.
2. Locate the People+Content IP application and click the link to download the
file locally.
3. Double-click setup.exe.
4. Follow the steps in the Setup Wizard to finish installing the application on the
computer.
Anyone using that computer can then double-click on the People+Content IP
icon to present content during video conferences using the VSX system.
Make the application available to all users in your organization by downloading the setup.exe
file to a local location that everyone can access.
Configure the VSX system content display after connecting a Visual Concert VSX
or ImageShare II unit as described in the section
Equipment on page 2-33.
To configure the content display:
Go to System > Admin Settings > Monitors > Graphics VGA.
1.
2. Configure these settings:
Setting Description
VGA Output with Indicates that the screen appears black when there is no content
No Graphics to display.
Chapter 4 - Customizing the VSX System
Connecting Data Collaboration
4 - 11