Polycom VSX Series Administrator's Manual page 119

Enabling AES Encryption
© Polycom, Inc.
3. Select and configure these settings:
Setting
Enable Remote
Access
Web Access Port
Allow Video
Display on Web
AES encryption is a standard feature on all VSX systems. When it is enabled, the
system automatically encrypts calls to other AES-capable systems.
To enable AES encryption:
>> Go to System > Admin Settings > General Settings > Security and select AES
Encryption.
Description
Specifies whether to allow remote access to the system by:
• FTP
• Web
• Telnet
• SNMP
You may select any of these, or any combination of them.
Note: The system restarts if you change the remote access
settings.
Specifies the port to use when accessing the system using VSX
Web.
If you change this from the default (port 80), specify a port number
of 1025 or higher, and make sure the port is not already in use.
You will need to include the port number with the IP address when
you use VSX Web to access the system. This makes
unauthorized access more difficult.
Note: The system restarts if you change the web access port.
Specifies whether to allow administrators to view the room where
the system is located, or video of calls in which the system
participates, using VSX Web.
Chapter 4 - Customizing the VSX System
4 - 29