Polycom VSX Series Administrator's Manual page 83

Configuring Telephony
© Polycom, Inc.
6. Select and configure these settings:
Setting
Enable Broadcast Mode
Enable People+Content
Video Format
Video Protocol
Audio Protocol
Frame Rate
You can use a SoundStation VTX 1000 conference phone with the VSX 6000,
VSX 7000, and VSX 8000 systems to place video calls, or to add video to audio calls.
To take advantage of the latest integration features, the VSX system requires version 7.5 or
later software and the VTX 1000 requires version 1.5 or later software.
You can connect an analog phone line to the VSX 8000 to make regular telephone
calls with the system or to add audio-only participants to video calls.
To configure telephony options:
1. Go to System > Admin Settings > Network > Telephony.
2. Configure these settings:
Setting
Room Telephone
Number
System Telephone
Number
VSX 8000
Description
Enables support for H.331 broadcast transmissions from
the VSX system.
Broadcast mode enables the system to send video and
audio to many other system, such as large satellite
networks.
Enables People+Content for broadcast mode.
Specifies the resolution at which video is transmitted.
Specifies the protocol used to transmit video. Choose the
lowest protocol supported by all systems in the
conference.
Specifies the protocol used to transmit audio.
Specifies the frame rate to use.
Description
Enter the telephone number of the room where the system is
located.
Specifies the analog phone number of the VSX 8000 system,
including country and area codes for the system's location.
Chapter 3 - Configuring Network Use
3 - 21