Polycom VSX Series Administrator's Manual page 191

Symptom
The monitor
displays an error
icon during an ISDN
call.
The monitor displays
an error icon during
an IP call.
System Lights
© Polycom, Inc.
Problem
The system has received
more than the acceptable
number of CRC errors or
FEC errors within one
second.
The system has detected
packet loss above the
acceptable level set for the
system.
The system lights are located on the front of your VSX system.
Model When the VSX system...
VSX 3000 Indicators are off
VSX 6000
Green indicator blinks slowly
VSX 7000
Green indicator flashes when
you use the remote control
Amber indicator flashes when
you use the remote control
Green indicator is on
Amber indicator is on
VSX 3000: Red indicator is on
VSX 6000, VSX 7000: Mute
indicator on the microphone
pod is red
VSX 8000 Blue indicator is on
Green indicator is on
Green indicator blinks
Red indicator turns on
momentarily
Mute indicator on the
microphone pod is red
Chapter 7 - Diagnostics and General Troubleshooting
Corrective action
Retry the call if the video or audio quality becomes
unacceptable to the call participants.
Retry the call if the video or audio quality becomes
unacceptable to the call participants.
It means...
No power to the system.
The system is sleeping.
The system is not in a call, and is
receiving signals from the remote
control.
The system is in a call, and is receiving
signals from the remote control.
The system is ready to make a call.
The system is in a call.
The system microphone is muted.
The system is connected to power but
powered off.
The system is powered on.
The remote control has been picked up
or set down.
The system is powering off.
The system microphone is muted.
7 - 27