Polycom VSX Series Administrator's Manual page 103

© Polycom, Inc.
With VSX 6000, VSX 7000, and VSX 8000 systems, you can connect a VCR or DVD
player to record your video conference. You can also connect two VCRs to play
material and record the conference at the same time.
The VCR inputs are active when you select camera 3.
To configure general VCR/DVD player audio settings:
1. Go to System > Admin Settings >Audio.
2. Select three times and configure these settings.
Setting Description
VCR Audio In Select VCR when playing a VCR into the system.
Mode Select Visual Concert or ImageShare II when sharing content
using a Visual Concert VSX or ImageShare II unit.
VCR/DVD In Level Sets the volume at which the VCR/DVD player plays, relative to
other audio from the system.
VCR/DVD Out Sets the volume at which the call is recorded.
Level
VCR/DVD Audio Allows you to record a call using one VCR or DVD, while playing
Out Always On recorded content into the call from a second VCR or DVD.
Do not select this setting if you have only one VCR or DVD player
connected.
Chapter 4 - Customizing the VSX System
4 - 13