Polycom VSX Series Administrator's Manual page 54

Administrator's Guide for the VSX Series
Connecting a VTX 1000 Conference Phone
2 - 30
After you have finished setting up the system, you will need to configure the mixer's behavior.
Refer to Designing Audio Behaviors on page
You will also need to configure the mixer according to the documentation supplied with it.
To connect a powered microphone to the VSX 8000 system:
>> Connect the microphone to one of the system's balanced audio inputs.
After you have finished setting up the system, you will need to configure the system to use
the powered microphones. Refer to
You can configure the system to provide power to the microphones.
If you have a VSX room system, you can connect a SoundStation VTX 1000
conference phone in place of a microphone pod.
To take advantage of the latest integration features, the VSX system requires version 7.5 or
later software and the VTX 1000 requires version 1.5 or later software.
The following table shows valid and non-valid equipment configurations using
the VTX 1000 conference phone.
These are valid:
Visual Concert VSX
4-15.
Designing Audio Behaviors on page
These are not valid:
www.polycom.com/videodocumentation
4-15.
Visual Concert VSX