Polycom VSX Series Administrator's Manual page 204

Administrator's Guide for the VSX Series
PathNavigator Error Codes
Appendix - 10
The following table lists PathNavigator error codes.
Code Cause
150 No Network
Resources
151 No Network
Resources
152 Gatekeeper
Problems
153 Incorrect Address
154 Gatekeeper
Problems
155 Gatekeeper
Problems
156 Gatekeeper
Problems
157 Gatekeeper
Problems
158 Gatekeeper
Problems
159 System Not
Registered with
Gatekeeper
160 Far Site Not
Registered with
Gatekeeper
164 Far Site Busy
167 System Not
Registered with
Gatekeeper
168 Unknown Issues
Description
The network does not have enough resources to
complete your call. Try calling at a lower rate, or try the
call again later.
The network does not have enough resources to
complete your call. Try calling at a lower rate, or try the
call again later.
Your call could not be completed because of an internal
error in the gatekeeper or endpoint. Contact the
gatekeeper or endpoint vendor for assistance.
Your call could not be completed because of an internal
error in the gatekeeper or endpoint. Contact the
gatekeeper or endpoint vendor for assistance.
Your call could not be completed because of an internal
error in the gatekeeper or endpoint. Contact the
gatekeeper or endpoint vendor for assistance.
Your call could not be completed because of an internal
error in the gatekeeper or endpoint. Contact the
gatekeeper or endpoint vendor for assistance.
Your call was rejected by the gatekeeper. Contact your
Network Administrator for assistance.
Your call could not be completed because of an internal
error in the gatekeeper or endpoint. Contact the
gatekeeper or endpoint vendor for assistance.
Your call could not be completed due to gatekeeper
problems. Try the call again later.
Your system must be registered with the gatekeeper
before you can place a call. Contact your Network
Administrator for assistance.
The system you are trying to call is not registered with the
gatekeeper.
The system you called is busy. Try the call again later.
Your system must be registered with the gatekeeper
before you can place a call. Contact your Network
Administrator for assistance.
Your call could not be completed due to an unknown
problem. Try the call again later.
www.polycom.com/videodocumentation