Polycom VSX Series Administrator's Manual page 43

© Polycom, Inc.
If you are setting up a VSX 8000 system, you will need to connect a composite
to S-video adapter to the video connector on the system end of the cable.
The VCR inputs are active when you select camera 3.
The microphone inputs remain active while the VCR/DVD is playing. Call participants may
wish to mute the microphones while playing VCR/DVD content.
To connect a VCR or DVD to record:
1. Connect the yellow, red, and white connectors of the audio and video cable to
the inputs on the VCR or DVD player.
2. Connect the other ends of the cable to the VCR outputs on the rear panel of the
system.
After you have finished setting up the system, you will need to configure the behavior of the
VSX system when using a VCR or DVD player. Refer to
Settings on page 4-12.
Chapter 2 - Setting Up Your System Hardware
S-Video adapter
3
VCR/DVD
Configuring VCR/DVD Player
2 - 19