Polycom VSX Series Administrator's Manual page 120

Administrator's Guide for the VSX Series
Configuring Call Settings
4 - 30
The Call Settings screens provide access to high-level options for the entire system.
For convenience, some of the User Settings options are repeated on these screens.
To configure call settings:
1. Go to System > Admin Settings > General Settings > System Settings > Call
Settings.
2. Configure these settings:
Setting
Allow Mixed IP and
ISDN Calls
VSX 3000
VSX 7000
VSX 8000
Maximum Time in
Call
Auto-Answer
Point to Point
Auto-Answer
Multipoint
VSX 3000
VSX 7000
VSX 8000
3. Select and configure these settings:
Setting
Display Time in
Call
Call Detail Report
Description
Specifies whether users can make multipoint calls that include
both IP and ISDN sites.
Unchecking this option provides extra security for systems
requiring LAN connectivity while placing encrypted calls over
ISDN lines. If you clear this selection, IP endpoints cannot join
ISDN calls.
Enter the maximum number of minutes allowed for call length.
When that time has expired, you see a message asking you if you
want to hang up or stay in the call. If you do not answer within one
minute, the call automatically disconnects. If you choose to stay
in the call at this time, you will not be prompted again.
Specifies whether to answer incoming point-to-point calls
automatically.
Specifies whether to answer incoming multipoint calls
automatically.
Description
Specifies whether to display the elapsed time or the local time
during a call. You can also choose not to display the time.
Specifies whether to generate a report of all calls made with the
system. When selected, details for all calls can be viewed via the
VSX Web and downloaded as a .csv file.
www.polycom.com/videodocumentation