Polycom VSX Series Administrator's Manual page 126

Administrator's Guide for the VSX Series
Configuring Directory Settings
Setting Date, Time, and Location
4 - 36
You can customize the behavior of the Directory on the Directory screen.
To configure system settings:
1. Go to System > Admin Settings > General Settings > System Settings >
Directory.
2. Configure these settings:
Setting
System Name
Allow Directory
Changes
Confirm Directory
Additions
Confirm Directory
Deletions
You can update the system with regional settings, including the location-specific
language and calling parameters.
To set the date, time, and location:
1. Go to System > Admin Settings > General Settings > Location.
2. Configure these settings:
Setting
Country
Language
Country Code
Area Code Required
Description
Enter or change the system name in this field. This name appears
on the screen for the far site when you are making calls.
Specifies whether users can save changes they make to the
directory.
Specifies whether users are prompted to confirm new directory
entries when saving the information for the last site called.
Specifies whether users are prompted to confirm deletions of
directory entries.
Description
Specifies the country where the system is located.
Changing the country automatically adjusts the country code
associated with your system number.
Sets the language for the user interface.
Specifies the country code for the system location.
Specifies if an area code is required to place ISDN calls in the
specified country.
www.polycom.com/videodocumentation