Connecting The Vsx 3000 To A Computer - Polycom VSX Series Administrator's Manual

Connecting the VSX 3000 to a Computer

© Polycom, Inc.
If you have a VSX 3000 system, you can save space in your office or conference
room by connecting your computer to the VSX 3000 17-inch, high-resolution XGA
display.
To connect a computer to the VSX 3000 system:
1. Connect the VGA cable from the VGA connector on the back of the VSX 3000
system to the VGA connector on your computer.
2. To use the system's built-in speakers for your computer's audio, connect an
audio cable from your computer to the audio input connector on the left side
of the VSX 3000 system.
Chapter 2 - Setting Up Your System Hardware
2 - 35