Polycom VSX Series Administrator's Manual page 132

Administrator's Guide for the VSX Series
Adding Marquee Text
Adding Screen Saver Text
4 - 42
You can create marquee text to display in the dialing entry field on the home
screen. You can create context-specific instructions for your users or, if the home
screen has Site buttons, the marquee text can provide information that helps users
choose which site to call.
To enter marquee text:
1. Go to System > Admin Settings > General Settings > Home Screen Settings.
2. In Dialing Display, select Display marquee and enter the text.
You can also add marquee text through the VSX Web.
Marquee text does not support double-byte characters.
You can customize the VSX system to display text when the system is in sleep
mode. For instance, you can display on-screen instructions to assist users with
what steps they should take next.
To enter screen saver text:
1. On a PC, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://255.255.255.255
3. Enter the user name and administrator's password, if a password has been
established.
4. Click System Setup > Utilities > Screen Saver and enter:
• Screen Saver Text — Appears as scrolling text when the system is in sleep
mode. You can use this scrolling text to provide instructions or next steps
for users of the system.
• Logo Screen Text — Appears underneath the logo before the system goes
into sleep mode.
Click Update.
5.
, to go to VSX Web.
www.polycom.com/videodocumentation