Installing The Optional Measurement Personality; Requirements; Recording The License Key - Agilent Technologies ESA-E Series User Manual

Spectrum analyzers cable fault measurement personality option 225

Hide thumbs Also See for ESA-E Series:

Table of Contents

Getting Started

Installing the Optional Measurement Personality

The tracking generator, Option 1DN or 1DQ is required to load the personality.

The measurement personality software you have purchased with your instrument

has been installed and the license key has been enabled at the factory. With any

future purchase of a new personality software, you will receive a certificate that

displays the unique license key number. The license key enables you to install, or

reinstall, any measurement personality you have purchased.

You will want to keep a copy of your license key number in a secure location.

Please enter your license key numbers in the box provided below for future

reference. If you should lose your license key number, get in touch with your local

Agilent Technologies service or sales office for assistance. For the location of

these offices, refer to

Table 4-1 on page

Active License Key Numbers for Instrument with Serial # ________

For Option______________ the license number is ________________________

You will need to use a license key number only under the following conditions:

• If you purchase an additional measurement software package.

• If the controller board is repaired or replaced.

37.

Chapter 1

Table of Contents