MAINTENANCE
GREASE LUBRICATION POINTS
There are grease fittings at each A-arms pivot point, each front or rear stabilizer bushing, and on the front propshaft
yoke. Apply grease until all traces of water have been purged out at each of these areas.
ITEM
Front Propshaft Yoke(s)
A-arm Pivot Bushings
Stabilizer Bar Bushings
2.8
RECOMMENDED LUBE
Polaris Premium U-Joint Grease
METHOD
Grease fittings every 500
miles (800 km).
9926813 R04 - 2013-2016 RZR 570 Service Manual
FREQUENCY
Grease before long periods
of storage, and after
thoroughly washing or
submerging the vehicle.
© Copyright Polaris Industries Inc.