System Upacking; Required Tools For Unpacking And Installation; Understanding The Unpacking Process; Pallet Contents - Quantum ActiveScale P100E3 Installation Manual

Hide thumbs Also See for ActiveScale P100E3:
Table of Contents

Advertisement

ActiveScale™ P100E3 Installation Guide

2 System Upacking

This section provides unpacking instructions for the ActiveScale P100E3.

2.1 Required Tools for Unpacking and Installation

• Anti-static mat or anti-static foam
• Box cutter
• Cart to hold components
• Level
• # 2 Phillips head screwdriver with a 12" shaft. If you are using a torque screwdriver, set the torque to
212 in-lb or 24 N-m for mounting kit installation.

2.2 Understanding the Unpacking Process

The unpacking process involves alternating between unpacking and inspecting components. This sequence
will help catch problems that might have occurred during packaging or shipping.
Because the requirements of every data center or customer installation are different, you might have to
unpack the system in a different sequence than described. If this occurs, ensure that the installation team
has thoroughly reviewed the information provided in this section and follows all safety and inspection
steps.
As you unpack the ActiveScale P100E3 system, look for obvious signs of damage. The following
scenarios are the most common ways a package can be damaged:
• Crushed corners caused by dropping the package.
• Split seams caused by excessive shearing force placed on the container.
• Punctures caused by a sharp object striking the packaging.
• Water damage caused by contact with a water source or storage in an overly humid environment.

2.3 Pallet Contents

ActiveScale P100E3 system is shipped on one half pallets and contains the P100E3 nodes and accessories.

Figure 2-1. P100E3 pallet contents

Carton
Storage Node Boxes (3)

2.4 Unpacking P100E3 Nodes

Important: P100E3 Nodes weigh 60 lbs (27 kg) and require two people to lift
them.
To unpack storage pallets:
• One Storage Node each
• One 1U mounting kit
• C13-C14 power cables
• 2 - 4 SFP Optical Transceivers (depending on the system ordered)
3
Contents

Advertisement

Table of Contents
loading

Table of Contents