Dxi6900 Node Power Supply Indicators - Quantum DXi6900 User Manual

Chapter 2: Basic Operations
DXi6900 Node
Link indicator
Activity Indicator
Figure 24: DXi6900 - 10 GBase-T Ethernet Port LEDs
1 - Activity Indicator 2 - Link Indicator

DXi6900 Node Power Supply Indicators

Each DXi6900 Node power supply has an illuminated translucent handle that serves as an indicator to show
whether power is present or whether a power fault has occurred (see
Not lit
Green
Flashing amber
Flashing green
All power supplies are hot swappable. When replacing power supplies, never remove more than one power
supply at a time from the system. Also, before you remove one power supply, make sure the other power
supply is operating correctly (indicator handle is green).
Quantum DXi6900 User's Guide
Off - Indicates the port is not connected to the network.
l
Green - Indicates the port is connected to the network at maximum speed (10
l
Gbps).
Amber - Indicates the port is connected to the network at less than its maximum
l
port speed.
Blinking green - Indicates network data is being sent or received.
l
Indicates power is not connected.
Indicates a valid power source is connected to the power supply and that the power supply
is operational.
Indicates a problem with the power supply.
When hot-adding a power supply, this indicates that the power supply is mismatched with
the other power supply. Replace the power supply that has the flashing indicator with a
power supply that matches the capacity of the other installed power supply.
Figure 25 on the next page):
53