Propeller Shafts
Propeller Shaft Construction
Most universal joints and ball joints require no maintenance. They are lubricated for life and can not be lubricated on
the vehicle. If a universal joint becomes noisy or worn, it must be replaced.
The propeller shaft is a balanced unit. Handle it carefully so that balance can be maintained.
[A]: Front propeller shaft
[B]: Rear propeller shaft
1. Front propeller shaft flange bolt
: Apply thread lock 99000-32110 to bolt thread.
2. Rear propeller shaft flange nut
3. Support washer
4. Spider joint assembly
: Apply grease (99000-25030) to spider bearing race.
General Description
Propeller Shafts:
5. Circlip
6. Flange (if equipped)
: 85 N⋅m (8.5 kgf-m, 61.5 lb-ft)
: 30 N⋅m (3.0 kgf-m, 22.0 lb-ft)
: Do not reuse.
3D-1
S5JB0B3401001
I5JB0B340001-01