Jam At The Exit - Xerox Phaser 4400 Manual

10.
If the envelope feeder was removed, re-install it now. Reload paper in the Multi-Purpose Tray.
11.
Check the front panel display. If the jam has been cleared and all covers are closed, the front panel
should display
Processing
jammed in the printer.
For additional information, access PhaserSMART.

Jam at the exit

1. Go behind the printer, squeeze the latch on the upper left corner of the rear cover and pull the
cover open.
Phaser™ 4400 Laser Printer
or . If a paper jam message remains, there is still paper
Ready
P4400-25
P4400-46
Paper Jams
13