Rep 11.4 Mailbox Rear Door; Rep 11.5 Mailbox Control Board - Xerox Phaser 4620 Service Manual

REP 11.4 Mailbox Rear Door

Parts List on PL 11.10 Item 5
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Mailbox Output Trays,
2. Separate the Mailbox from the printer,
3. Remove 2 screws and loosen the side covers.
4. Open the rear door 90 degrees to release the hinges for the side covers,
Figure 1 Remove the rear door
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
WARNING
REP 11.1.
GP 14.
Figure

REP 11.5 Mailbox Control Board

Parts List on PL 11.15 Item 1
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Mailbox Output Trays,
2. Separate the Mailbox from the printer,
3. Remove the Right Cover,
1. 4. Disconnect all Control Board Connections P/J2 ~ P/J5.
5. Remove 4 (metal) screws that secure the board to the bracket,
5/2011
4-119
WARNING
REP 11.1.
GP 14.
REP 11.3.
Figure 1 Remove the Control Board
REP 11.4, REP 11.5
Figure 1.
Repairs