Controlling The Software Views From Your Controller - Native Instruments MASCHINE STUDIO Getting Started

Pinning the Controller Modes
You can also pin (i.e. lock) controller modes, so the controller doesn't switch back when releas-
ing a mode button:
1. Press and hold a controller mode button, e.g., GRID.
2. Press Button 1 above the left display.
You can release the
→
GRID again.
Once a mode has been pinned your controller will automatically pin the mode next time
it is pressed.
You can unpin any mode by pressing its button together with Button 1 again.
See section Pinning the Scene Mode for an example of use. For more detailed informa-
tion on controller modes, please refer to the Manual.
10.1.2

Controlling the Software Views from Your Controller

Your controller provides you with numerous shortcuts to modify the display in the MASCHINE
software window without having to touch your mouse.
10.1.2.1 Controlling the Software Views using the MASCHINE STUDIO Controller
Press and hold the
►
GATE + Button 1 to pin the Navigate mode so that you can release
Navigate mode (see
GRID button: The controller will remain in Grid mode until you press
NAVIGATE button to enter Navigate mode. You can also press
↑10.1.1, Controller Modes and Mode
Using Your MASCHINE Controller
NAVIGATE and stay in
Pinning).
MASCHINE STUDIO - Getting Started - 149
Quick Reference
NAVI-