4.
To transpose the selected events down in octaves press
selected events up press
+
The notes are transposed by an octave. If nothing is selected, all event/notes in the Pat-
→
tern will be affected.
6.4.4
Nudging Events in a Pattern
In addition to the Step Grid, a secondary grid specifically controls the timings at which existing
events/notes can be nudged in the Pattern: the Nudge Grid.
Nudging events means shifting them a small amount ahead or behind their current position.
The Nudge Grid is based on the Step Grid:
▪ The Nudge Grid is active, only when the Step Grid is active. If the Step Grid is disabled,
nudging events will shift them at the maximum resolution of the sequencer.
▪ By default, the Nudge Grid resolution is half a step, meaning that events will be nudged by
half a step at a time.
▪ If you set the Nudge Grid resolution to a full step, the Nudge Grid will mirror the Step Grid
and you can nudge events with the same resolution as when creating or quantizing events.
▪ You can also set the Nudge Grid resolution to a smaller fraction of the Step Grid resolution.
This allows you to nudge events with even finer increments.
To change the Nudge Grid's settings:
1.
Press the
GRID
button.
SHIFT
+ OCT+.
Recording and Editing Patterns
SHIFT
+
OCT-
to transpose the
MASCHINE JAM - Manual - 103
Editing a Pattern