Mute And Solo; Hardware - Native Instruments Groove production studio Manual

Resetting a Sound.
4.8

Mute and Solo

Muting is used to bypass the audio signal of either a Sound or a Group, whereas Solo is pretty
much the opposite: it mutes all other Sounds and Groups, so that you can listen to the select-
ed Sound or Group alone. The combination of both is a useful means to play live and to test
different sequences together.
4.8.1

Hardware

Soloing Sounds and Groups
► Press SOLO and hold it: now you can solo Sounds by pressing their pads, and Groups by
pressing the corresponding Group buttons.
Solo is a temporary mode, therefore you will have to hold
and Button 1 at the same time, the Solo function gets locked, e.g. you stay in Solo mode until
you press SOLO again. There are two more functions in the Solo mode:
ton 3) to turn all Sounds on and
rently in focus off.
NONE (press Button 4) to turn all Sounds of the Group cur-
SOLO to access it. If you press
ALL ON
MASCHINE - Manual - 82
Sound Slots
Mute and Solo
SOLO
(press But-