Worldwide Construction And Forestry Division 380GLC Operator's Manual page 83

•Program Failure Alarm—This alarm will appear along
with a red warning alarm. A problem occurred during
the Service ADVISOR™ Remote (SAR) programming
process. Contact your authorized John Deere dealer.
•Unable to Program Alarm—This alarm will appear
along with a yellow warning alarm. A condition exists that
will not allow the transfer of new Service ADVISOR™
Remote (SAR) software to happen. Retry programming or
contact your authorized John Deere dealer.
•Coolant Level Alarm—Check coolant level and refill
coolant.
•Engine Air Filter Restriction Alarm—Air filter elements
are clogged. Clean or replace air filter elements.
•Boost Temperature Alarm—Engine intake air
temperature has abnormally increased. Stop operation.
Check charge air cooler for clogging and intake air piping
for disconnection.
•Hydraulic Oil Overheat Alarm—Hydraulic oil
temperature has abnormally increased. Stop operation,
check hydraulic oil level, and check for leaks.
Operation—Monitor Operation
TX1087189 —UN—21JAN11
TX1087190 —UN—21JAN11
TX1086349 —UN—06JAN11
TX1086365 —UN—06JAN11
TX1086355 —UN—06JAN11
TX1086351 —UN—06JAN11
Continued on next page
2-2-8
Program Failure Alarm
DB84312,000002D -19-28JUL17-12/25
Unable to Program Alarm
DB84312,000002D -19-28JUL17-13/25
Coolant Level Alarm
DB84312,000002D -19-28JUL17-14/25
Engine Air Filter Restriction Alarm
DB84312,000002D -19-28JUL17-15/25
BOOST
Boost Temperature Alarm
DB84312,000002D -19-28JUL17-16/25
Hydraulic Oil Overheat Alarm
DB84312,000002D -19-28JUL17-17/25
092221
PN=83