Safety-Operating Precautions; Use Steps And Handholds Correctly; Start Only From Operator's Seat; Use And Maintain Seat Belt - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Use Steps and Handholds Correctly

Prevent falls by facing the machine when you get on and
off. Maintain 3-point contact with steps and handrails.
Never use machine controls as handholds.
Use extra care when mud, snow, or moisture present
slippery conditions. Keep steps clean and free of grease
or oil. Never jump when exiting machine. Never mount or
dismount a moving machine.

Start Only From Operator's Seat

Avoid unexpected machine movement. Start engine only
while sitting in operator's seat. Ensure that all controls and
working tools are in proper position for a parked machine.
Never attempt to start engine from the ground. Do not
attempt to start engine by shorting across the starter
solenoid terminals.

Use and Maintain Seat Belt

Use seat belt when operating machine. Remember to
fasten seat belt when loading and unloading from trucks
and during other uses.
CAUTION: Prevent personal injury. Check
condition of seat belt and mounting hardware
before operating machine. Replace if worn,
frayed, or damaged.
Replace seat belt at least every 3 years,
regardless of condition.
Safety—Operating Precautions
1-3-1
Operate Only From Operators Seat
TX,SEAT,BELT -19-27JUL20-1/1
TX,STEPS -19-09FEB11-1/1
TX,SOFOS -19-29JUN21-1/1
092221
PN=38