Track Adjuster, Working Tool Pivot, Swing Bearing, And Swing Bearing Gear Grease - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Track Adjuster, Working Tool Pivot, Swing
Bearing, and Swing Bearing Gear Grease
Use grease based on NLGI consistency numbers and the
expected air temperature range during the service interval.
The following grease is preferred:
•
John Deere SD POLYUREA GREASE
The following greases are also recommended:
•
John Deere HD MOLY GREASE
•
John Deere HD LITHIUM COMPLEX GREASE
•
John Deere HD WATER RESISTANT GREASE
Other greases may be used if they meet the following:
•
NLGI Performance Classification GC-LB
IMPORTANT: Some types of grease thickener are not
compatible with others. Consult grease supplier
before mixing different types of grease.
Maintenance—Machine
3-1-12
o o
50 C 122 F
o o
40 C 104 F
o
o
30 C 86 F
o o
20 C 68 F
o o
10 C 50 F
o o
0 C 32 F
o
o
-10 C 14 F
o o
-20 C -4 F
o o
-30 C -22 F
o o
-40 C -40 F
Grease
OUT4001,00007D4 -19-11APR17-1/1
092221
PN=136