Parking The Machine - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Table of Contents

Advertisement

Parking the Machine

IMPORTANT: During freezing weather, prevent
damage to undercarriage components from
frozen mud and dirt. Machine must be
parked on a solid level surface to prevent
tracks freezing in the ground.
1. Park machine on a solid level surface.
During freezing weather, clean mud and dirt from
tracks, rollers and track frames. Clean the steps and
walkways after parking the machine.
If tracks are frozen in the ground, slowly raise the
machine using boom to free the tracks. Move machine
carefully.
2. Lower equipment to the ground.
3. Turn auto-idle switch (1) to the A/I OFF position.
IMPORTANT: Turbocharger can be damaged
if procedure to shutdown engine is not
done properly.
4. Run engine with engine speed dial (2) at 1/3 position
without load for 2 minutes.
5. Turn engine speed dial to slow idle position.
6. Turn key switch (3) to the OFF position. Remove key
from switch.
7. Place pilot shutoff lever (4) to locked (UP) position.
IMPORTANT: Prevent cab electrical component
damage from bad weather. Windows, roof
vent, and cab door must be closed to
prevent rain from entering.
8. Close windows, roof vent, and cab door.
9. Lock all access doors and compartments.
Operation—Operating the Machine
1— Auto-Idle Switch
2— Engine Speed Dial
2-3-21
Switch Panel
Pilot Shutoff Lever
3— Key Switch
4— Pilot Shutoff Lever
ER79617,0000DCF -19-09JAN12-1/1
092221
PN=122

Advertisement

Table of Contents
loading

Table of Contents