Worldwide Construction And Forestry Division 380GLC Operator's Manual page 243

Miscellaneous—Operational Checkout
6
7
TX1120481 —UN—17AUG12
5— Distance of Mistrack
6— Acceleration and Deceleration Zone (approximately): 3—5 m (10—16 ft.)
7— Test Line (distance): 20 m (66 ft.)
8— Track Print
Operate machine at full travel forward speed on a flat and level surface approximately
30 m (99 ft.).
NOTE: When machine mistracks right, hydraulic pump 1 circuit oil flow may be
less than specification. When machine mistracks left, hydraulic pump
2 circuit oil flow may be less than specification.
Observe direction of mistrack.
Create a straight test line 20 m (66 ft.) (7) long between two points on track print (8).
Measure and record greatest distance of mistrack (5) between inside edge of track
print and test line.
Repeat procedure in reverse travel.
LOOK: Does machine mistrack less than 200 mm (7.87 in.)?
8
5
6
Tracking Check
Continued on next page
4-2-38
YES: Go to next check.
NO: See your authorized
dealer.
CN93077,000003A -19-16MAY13-46/53
092221
PN=243