Safety-General Precautions; Recognize Safety Information; Follow Safety Instructions; Operate Only If Qualified - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Recognize Safety Information

This is the safety alert symbol. When you see this
symbol on your machine or in this manual, be alert
for the potential of personal injury.
Follow the precautions and safe operating practices
highlighted by this symbol.
A signal word — DANGER, WARNING, or CAUTION —
is used with the safety alert symbol. DANGER identifies
the most serious hazards.
On your machine, DANGER signs are red in color,
WARNING signs are orange, and CAUTION signs are
yellow. DANGER and WARNING signs are located near
specific hazards. General precautions are on CAUTION
labels.

Follow Safety Instructions

Carefully read all safety messages in this manual and on
your machine safety signs. Keep safety signs in good
condition. Replace missing or damaged safety signs. Use
this operator's manual for correct safety sign placement.
Be sure that new equipment components and repair parts
include the current safety signs. Replacement safety
signs are available from your John Deere dealer.
There can be additional safety information contained on
parts and components sourced from suppliers that is not
reproduced in this operator's manual.
Learn how to operate the machine and how to use controls
properly. Do not let anyone operate without instruction.
Keep your machine in proper working condition.
Unauthorized modifications to the machine could impair
the function or safety and affect machine life.

Operate Only If Qualified

Do not operate this machine unless the operator's manual
has been read carefully, and you have been qualified by
supervised training and instruction.
Operator should be familiar with the job site and
surroundings before operating. Try all controls and
Safety—General Precautions
1-2-1
If you do not understand any part of this manual and need
assistance, contact your John Deere dealer.
machine functions with the machine in an open area
before starting to work.
Know and observe all safety rules that may apply to every
work situation and work site.
TX,RECOGNIZE -19-28JUN10-1/1
TX,FOLLOW -19-20JAN11-1/1
TX,QUALIFIED -19-18JAN11-1/1
092221
PN=30