Fuel Tank; Hydraulic Breaker Attachment; Fluid Analysis Program Test Kits And 3-Way Coolant Test Kit - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Fuel Tank

CAUTION: Fuel is flammable and may ignite if
spilled on hot engine. To prevent injury, handle
fuel carefully. If engine is hot or running, DO NOT
fill the fuel tank. DO NOT smoke while filling
fuel tank or working on fuel system.
Specification
Fuel Tank—Capacity.................................................................... 628.0 L

Hydraulic Breaker Attachment

IMPORTANT: Avoid mixing different brands or types
of oils. Oil manufacturers engineer the oils to
meet certain specifications and performance
requirements. Mixing different oil types can
degrade lubricant and machine performance.
This excavator is factory filled with SUPER
EX 46HN extended life zinc-free hydraulic oil.
Avoid servicing the excavator with products
that do not meet this specification. If oils
have been mixed or if alternate service oils
are desired, an authorized dealer must flush
the complete hydraulic system.
Percentage of Operating Time
Hydraulic Breaker Used
100
60
40
20
Fluid Analysis Program Test Kits and 3-Way
Coolant Test Kit
Fluid Analysis Program Test Kits and the 3-Way Coolant
Test Kit are John Deere fluid sampling products to help you
monitor machine maintenance and system condition. The
objective of a fluid sampling program is to ensure machine
availability when you need it and to reduce repair costs by
identifying potential problems before they become critical.
Engine, hydraulic, power train, and coolant samples should
be taken from each system on a periodic basis, before
a filter or fluid change interval. Certain systems require
more frequent sampling. Consult your authorized John
Deere dealer on a maintenance program for your specific
application. Your authorized John Deere dealer has the
sampling products and expertise to assist you in lowering
your overall operating costs through fluid sampling.
Maintenance—Periodic Maintenance
IMPORTANT: Avoid engine damage. If machine has
To avoid condensation, fill the fuel tank at the end of each
work day. Shut off engine before filling.
166.0 gal.
Hydraulic breaker operation subjects the hydraulic system
of the machine to possible contamination and accelerated
deterioration. The hydraulic return filter and hydraulic
oil must be replaced frequently to prevent damage
to hydraulic pumps and other hydraulic components.
Change the hydraulic return filter and hydraulic oil at the
intervals recommended in the table based on the amount
of machine operating time the attachment is used.
NOTE: John Deere recommends the addition of
Hydraulic Return Filter
Change Interval (hours)
100
150
200
300
3-2-4
run out of fuel, engine will not start. Contact
your authorized dealer for instructions.
the hydraulic filter restriction indicator kit
with the attachment.
Hydraulic Oil Change
ER79617,0000D4E -19-28APR14-1/1
Interval (hours)
600
800
1000
1300
VD76477,00001DB -19-24NOV20-1/1
TX,ANALYSIS -19-20JAN11-1/1
PN=145
092221